Car Shampoo Application Guide

How to Apply Nasiol Cleanion Pro

Preparation

  1. Shake Well: Shake the bottle well before use.
  2. Ideal Conditions: Apply out of direct sunlight and on cold surfaces.

Machine Application

  1. Dilution:
    • Foam Lance: Dilute Nasiol Cleanion Pro 1:1.
    • Water Tank: Dilute 1:100.
  2. Foam Application:
    • Apply a thick layer of foam onto the vehicle's surface.
    • Let it dwell for 1-2 minutes.
  3. Rinse:
    • Use a high-pressure washer to rinse thoroughly and remove all surfactants.
  4. Dry:
    • Gently dry the vehicle with a soft, lint-free drying towel.

Bucket Application

  1. Initial Rinse:
    • Rinse the vehicle with a hose or high-pressure water.
  2. Dilution:
    • Dilute 20 mL (2 caps) of Nasiol Cleanion Pro in 10 L of warm water.
  3. Wash:
    • Apply the solution with a high-quality wash mitt.
    • Use a two or three-bucket wash method with a grit guard, if possible.
    • Work in small sections from top to bottom in straight lines.
    • Allow stubborn grime to soak.
  4. Rinse:
    • Rinse thoroughly with a hose or high-pressure washer to remove all surfactants.
  5. Dry:
    • Gently dry the vehicle with a soft, lint-free drying towel to prevent water spotting.
Back to blog