How to Apply Nasiol MetalCoat F2: A Step-by-Step Guide
Optimizing your vehicle’s protection with Nasiol MetalCoat F2 requires careful application. Follow this guide to ensure maximum product performance and longevity.
Preparation
-
Ideal Conditions: Ensure the temperature is between +5°C and +30°C (41°F - 86°F) with a relative humidity of around 50%. Avoid direct sunlight and work on cool surfaces.
-
Thorough Cleaning: Wash your vehicle thoroughly. Use a clay bar if necessary to decontaminate the surface.
-
Polishing: Apply polishing or compounding using appropriate tools and silicone-free, wax-free cutting compounds to match your vehicle’s surface condition.
-
Final Wash and Dry: After polishing, wash the car again and ensure all application areas are completely dry.
-
Surface Preparation: Use Nasiol Clean to remove any residual contamination and dry with a lint-free microfiber cloth.
Application
-
Protective Gear: Wear the protective nitrile gloves included in the MetalCoat F2 box.
-
Spraying:
- Consumption is 5-8mL/m² (5-8mL/10ft²).
- Spray on one square meter around 20-30 times with a standard MetalCoat F2 bottle.
- Do not work on areas larger than 1m²/10ft² at once.
-
Buffing: Buff the sprayed area immediately with the Nasiol Microfiber Cloth.
Post-Application
- Curing: Keep the coated surface away from direct sunlight, dust, water, and contamination for a 24-hour curing period.
By following these steps, you can ensure your vehicle receives the best protection and shine with Nasiol MetalCoat F2.
For more information on application tips and product details, visit our website or contact our customer support.
BOX CONTENT
- Nasiol MetalCoat F2
- Microfiber Cloth
- Mini Trigger
- Nitrile Gloves
- Nasiol Sticker
| Specification | Details |
|---|---|
| Product Name | Nasiol MetalCoat F2 |
| Volume | 50mL |
| Application Surfaces | Car body, engine plastic and metal parts, headlights, taillights, rims |
| Durability | Up to 1 year |
| Chemical Resistance | pH range 1-12 |
| Scratch Resistance | High |
| Water Repellency | Exceptional |
| Oil Repellency | High |
| Coating Thickness | 200-300nm |
| Consumption per Unit Area | 5-8mL/m² |
| Consumption by Vehicle Size | - Small Vehicles (A-B Class): 30-35mL<br> - Medium Vehicles (C-D Class): 35-40mL<br> - Large Vehicles (E Class & SUV): 40-50mL |
| Temperature Durability | 275°C |
| Application Temperature | 5°C-30°C |
| Curing Period | - 4 hours to touch<br> - 24 hours for water contact |
| Storage Conditions | -3°C to +30°C |
| Shelf Life | - 1 year without opening the bottle<br> - 1 week after opening the bottle |
| Quantity per Parcel | 12 pieces |